| Bounce Back Rubber Playground Surfaces |
 |
 |
 |
 |
 |
Bounce Back Safety Playground Surfaces are made of commercial grade, shock absorbing, resilient, rubber mats that provide long-term answers to safety, while offering ADA accessibility. This playground flooring offers excellent performance, durability, appearance and ease of installation. The non-slip surface is easy to clean and maintain, and will be your safety solution for many years to come.
These eco-friendly rubber tiles are manufactured in the USA from recycled scrap tires.
Originally designed as outdoor playground surfacing, these safety rubber tiles are now used for all types of applications where falls and injuries may occur including swim parks, skateboard parks, and rock climbing walls. In addition, Bounce Back rubber safety surfaces are ideal for decks, stairways, patios, pool areas, sports courts, walkways and areas needing sound reduction. It is also excellent for indoor applications including areas around stairs and bunk beds, and it is great exercise flooring.
Peace of Mind.
Unlike loose fill, Bounce Back has a consistent shock absorbency throughout the play area and has the ability to meet all safety standards for fall zones higher than a 6' fall. Less worries. Fewer injuries. Reduced liability. Lower insurance premiums.
Safe, Clean Play Area.
Harmful objects can hide in loose fill product like sand, wood chips or gravel. Bounce Back's solid construction does not allow foreign objects to hide. There is also no loose fill material (like rubber mulch or wood chips) for children to kick, throw or swallow. Keep in mind, rubber
always has a "rubber" odor that will diminish over time.
Allows Play Year Round.
Allows for continuous use even during the rainy season. Because water does not puddle on the surface, but rather moves quickly through the top and through the "legs" of the cushions, the play area is ready for use soon after heavy rains.
Easy to Install.
Low cost installation that is easily installed over concrete or asphalt by grounds personnel or outside service providers. Installation Instructions.
Virtually Maintenance Free.
No daily maintenance required to maintain safety standards means less cost and less hassle. It looks and performs great! Easy to clean. Indoor cleaning is accomplished with a broom, damp sponge, mop or vacuum cleaner. For outdoor cleaning, a water hose, leaf blower or broom is sufficient.
24 - 7- 365.
Proper safety and protection 24 hours a day, 7 days a week, 365 days a year. Unlike loose fill solutions, protection in the most critical fall zones remains and is not displaced by children during play activities.
Four Great Colors Available.
Available in solid black, terracotta red, green, or blue. (please note, colors may vary slightly due to changes in dye lots).
100% Recycled. Earth Friendly.
Each 24" x 24" safety tile is made from scrap tires that would otherwise be landfilled. Bounce Back can be recycled again and again.
Quality Assurance.
The Bounce Back playground safety mats are guaranteed against any manufacturing defects in material and workmanship for a period of 5 years from the date of purchase.
Adhesive for Installation.
Installation adhesive (glue) is available in two forms. For small, home installations, it is sufficient to simply lay down the tiles and glue together the edges only with a caulking gun (CX-948). For larger installations, the adhesive can be obtained by the gallon for installation with a trowel (CX-941). These adhesives are a one-component polyurethane-based, structural, industrial grade adhesive. Elastomeric properties enable it to move with rubber as it expands and contracts. The patented formula is VOC compliant, non-flammable, and contains no solvents or water. It has freeze-thaw stability (unlimited cycles). Both adhesives provide excellent initial grab, and outstanding bond strength. It is formulated for indoor and outdoor applications on concrete, asphalt, rubber, cork, plywood, particle or chip board, cement, gypsum underlayment, and over radiant heat flooring. When lightly misted with water, drying time is accelerated and will fully bond in just over 2 hours. Color: light brown.
- CX-941 Polyurethane Adhesive - Trowel grade.
Covers approx. 50 s.f. per gallon (use 3/16"x1/4"x1/4" trowel).
2 gal. container: $94.99
5 gal. container: $204.99
- CX-948 Polyurethane Adhesive - Gun grade (for edge adhesion only).
Covers approx. 50 s.f. per tube (use caulking gun, 1-2 beads of adhesive per edge, none on bottom of tiles).
Each tube: $9.99
Bounce Back cushions meet and exceed the requirements as established by the Consumer Product Safety Commission (CPSC), Americans with Disability Act (ADA), and the American Standard for Testing Materials (ASTM) methods. Testing is done regularly.
Bounce-Back Thickness and Pricing Guide |
||
| Fall Height | Required Tile Thickness |
Price (per tile) |
| 3' Fall | 1.75" | $24.99 |
| 4'-5' Fall | 2.25" | $25.99 |
| 6' Fall | 2.5" | $27.99 |
| 7'-8' Fall | 3.5" | $29.99 |
| 9'-10' Fall | 4" | $35.99 |
| Note: Prices shown DO NOT include shipping costs. A shipping quote is required. How many tiles do I need for my desired floor dimension? See our Tile Calculator |
||
Made in the USA 
| Specifications | Common Applications | |
| Product Specifications Sheet Installation Instructions Playground Safety Information |
• Playgrounds • Decks • Diving Boards • Exercise Flooring • Patios • Play Areas |
• Pool Areas • Rock Climbing Walls • Safety Areas • Skateboard Parks • Sound Reduction • Stairways |
;) |
;) |
;) |
;) |
Solid Black |
Terracotta Red |
Blue |
Green |
Bounce Back 2'x2' Rubber Playground Safety Mats (Tiles):
How many tiles do I need for my desired floor dimension? See our Tile Calculator
